CPU Undervolting/Overvolting Tutorial
- ThrottleStop
- Process Lasso
下载地址:
ThrottleStop
Process Lasso
注意事项:
XTU和TS不需要用在一起
ThrottleStop
下载后解压到固定位置(不要轻易更改的路径)(例如”C:\Program File\ThrottleStop”)
然后点开ThrottleStop.exe
左上第一个红框是选择配置文件,软件默认有4个配置文件
- Performance
- Game
- Internet
- Battery
用法就像名字一样(废话)
把你的每个选项里的Speed Shift - EPP都勾上,从左到右分别设成0/30/128/255
左下那个红框,先介绍第一列的功能
Clock Modulation和Chipset Clock Modulation
不需要勾选!
Set Multiplier
不设也行
Speed Shift EPP 非常有用!
看到左边的数字了吗,那里是可以编辑的!(想不到吧)
值取一个0-255的数字,越接近0 性能越高,越接近255越节能(性能越低)
Power Saver 需要勾选 Disable Turbo 才能使用，该选项确保待机频率最低以降低功耗，对较新的处理器来说用处不大，因为现代处理器有新技术降低待机功耗。比酷睿 2 更新的处理器不建议使用这个。
看着办,一般不勾
Disable Turbo 关闭睿频.没啥可说
现在处理器最好别勾(你基础频率才2G+)
BD PROCHOT 非常,非常重要和有用
在温度达到某一值的时候降低功率,俗称温度墙,就是这东西.(默认打开)
有需要就关上,但并不建议关
!!!关了如果没有其他措施会导致cpu无法自动降频,直到100度强制断电!!!
Save 将当前设置存入 ini 文件。
修改完记得按一下
打开下面 Options 按钮
Do Not reset FID/VID on exit，退出不TS恢复设置
建议勾上
Start Minimized 启动时最小化
建议勾上
Minimize on Close
建议勾上
Nvidia GPU/AMD GPU 你用哪个勾哪个
可以不勾
FIVR(最重要的部分)
直接说中间那行,左边不说了.
上面FIVR CONTROL很好理解,就是指选择哪个组件,然后通过下面的XXX Voltage来调整
XXX Voltage是重点,这里为了防止你瞎改,还特意有一个”Unlock Adjustable Voltage”,必须先点了这个才能修改下面的设置
注意不要碰到那个STATIC!
不要碰那个Voltage
看Offset Voltage,Range是控制你调整范围,左边是降低电压,右边升高电压
IccMax 不明
如果有人知道请评论区告诉我,谢谢
这里需要你自己调出最适合你电脑的OFFSET VOLTAGE
每个CPU的质量不一样,没有统一数据
Save Voltages Changes to ThrottleStop.INI 选项一，不保存电压设置。选项二，关闭时保存。选项三，立即保存。
设置开机自启动
按一下windows(或者按搜索)输入任务计划程序
任务计划程序 - 创建基本任务
设置名称 - 下一步
希望何时开始？当用户登录时
希望执行什么操作？启动程序
程序或脚本：填入ThrottleStop.exe 的完整路径
勾选“当单击完成时，打开任务属性对话框”
勾选“使用最高权限运行”
条件选项卡：取消所有的勾选项，有些灰色的勾选项可以先勾选他的上层将其取消之后再取消勾选他的上层。总之不要有任何的勾选项，灰色的也不要有。
设置选项卡：勾选允许按需运行任务。其余全部取消勾选。
确定。
Process Lasso
施工中…..
- ThrottleStop
- Process Lasso
Download Links:
ThrottleStop
Process Lasso
Notes:
XTU and TS should not be used together.
ThrottleStop
After downloading, extract it to a fixed location (a path that won’t be changed easily) (e.g., C:\Program File\ThrottleStop)
Then open ThrottleStop.exe
The first red box in the upper left is for selecting a profile. The software defaults to having 4 profiles.
- Performance
- Game
- Internet
- Battery
Usage is just like the names suggest (obviously).
Check the Speed Shift - EPP option in each of your profiles, and set them from left to right to 0 / 30 / 128 / 255 respectively.
The lower left red box, first let’s explain the functions in the first column
Clock Modulation and Chipset Clock Modulation
Do NOT check these!
Set Multiplier
It’s okay not to set this.
Speed Shift EPP Very useful!
See the number on the left? That’s editable! (Surprised?)
Enter a value between 0-255. Closer to 0 means higher performance, closer to 255 means more power saving (lower performance).
Power Saver Requires Disable Turbo to be enabled for use. This option ensures the lowest idle frequency to reduce power consumption. It’s not very useful for newer processors as modern ones have new technologies to reduce idle power consumption. Not recommended for processors newer than Core 2.
Decide for yourself, usually leave it unchecked.
Disable Turbo Disables Turbo Boost. Self-explanatory.
Best not to check with modern processors (your base frequency is only 2G+).
BD PROCHOT Extremely, extremely important and useful.
Reduces power when the temperature reaches a certain value, commonly known as the temperature throttle, this is it. (Enabled by default)
Turn it off if needed, but it’s generally not recommended.
!!! If you turn it off without other measures, the CPU will be unable to downclock automatically until it hits 100°C and forces a shutdown!!!
Save Saves the current settings to the ini file.
Remember to click this after making changes.
Click the Options button at the bottom.
Do Not reset FID/VID on exit: TS will not restore settings on exit.
Recommended to check.
Start Minimized: Minimize on startup.
Recommended to check.
Minimize on Close:
Recommended to check.
Nvidia GPU/AMD GPU: Check the one you are using.
Optional.
FIVR (The Most Important Part)
Let’s go straight to the middle line, ignoring the left side for now.
FIVR CONTROL above is easy to understand, it means selecting which component, then adjusting via the XXX Voltage below.
XXX Voltage is the key point. To prevent you from messing things up, there’s an “Unlock Adjustable Voltage” option. You must click this first to modify the settings below.
Be careful not to touch the STATIC button!
Do not touch the Voltage.
Look at Offset Voltage. Range controls your adjustment range. Left side decreases voltage, right side increases voltage.
IccMax Unclear.
If anyone knows, please tell me in the comments, thank you.
Here, you need to tune the OFFSET VOLTAGE that works best for your computer yourself.
The quality of each CPU is different; there is no universal data.
Save Voltages Changes to ThrottleStop.INI Option one: don’t save voltage settings. Option two: save when closing. Option three: save immediately.
Setting Up Auto-start on Boot
Press the Windows key (or search) and type Task Scheduler.
Task Scheduler -> Create Basic Task…
Name -> Next
When do you want the task to start? When the user logs on.
What action do you want the task to perform? Start a program.
Program/script: Enter the full path to ThrottleStop.exe.
Check “Open the Properties dialog for this task when I click Finish.”
Check “Run with highest privileges.”
Conditions tab: Uncheck all options. Some grayed-out options may need their parent option checked to be selectable, then you can uncheck both the parent and the child. In the end, ensure there are no checkboxes checked, including grayed-out ones.
Settings tab: Check “Allow task to be run on demand.” Uncheck all others.
OK.
Process Lasso
Under construction…..